|
| Controls, Components, Hardware |
 |
| |
| In order to better serve our customers, Solar Technology provides top-quality equipment and parts for solar installations, repair and maintenance. If you do not see something you need, please contact us so we can accomodate you. |
Solar Controls for PhotoVoltaic Systems
Dependable Power for Solar Domestic Hot Water Systems
» MODEL # PV-10
» MODEL # PV-M20
Siemens Solar has engineered the ThermoLine series of modules to power circulation pumps in pressurized indirect or closed-loop solar hot water systems.
Tests have show that systems using solar power can be superior to both AC systems with differential controllers and horizontal thermosiphon systems. PV-10 modules are designed specifically to match the physical and electrical requirements of AET collectors, making systems more economical, efficient and easier to install.
Solar hot water systems require a power source that can fully utilize available collector heat. To accomplish thie ARCO Solar has designed ThermoLine modules to economically match the power requirements of specific DC circulation pumps.
The modules begin operating the circulation pump when the insolation is sufficient to begin heating the water. As the insolation increases, so does the pump flow rate.
Maximum system performance is obtained by a proper component match. In most cases a properly configured system with ARCO Solar ThermoLine modules can outperform systems using an AC pump with differential control. |
| ----------------------------------------------------------------------------------------------------------------------------------------- |
|
MODEL # PV-10
PV-10 modules are dependable and they feature anodized black framing. A unique flanged mounting system on some models makes installation directly on the collector quick, easy, and visually appealing.
At the heart of PV-10 modules are high efficiency crystal cells. All modules feature double construction designed to meet the rigors of practically any environmental condition. |
| ----------------------------------------------------------------------------------------------------------------------------------------- |
|
| PV-10 Specifications |
| • |
Maximum Power (@ 25 C) 7.75 Watts |
| • |
Voltage at max power (@ 25 C) 19.4 Volts |
| • |
Current at max power (@ 25 C) 0.40 Amps |
| • |
Open Circuit Voltage (@ 25 C) 23.6 Volts |
| • |
Short Circuit Voltage (@ 25 C) 0.44 Amps |
| • |
Dimensions: Length 30.0” (76.2 cm) X Width 5.0” (12.7 cm) X Depth 1.38” (3.5 cm) (excluding mounting bracket) |
| • |
Weight: 5.5 lbs. (2.5 kg) |
| • |
High efficiency single crystal cells. |
| • |
Sturdy construction with tempered glass front. Attractive black anodized aluminum frame. |
| • |
Unique flanged mounting system. |
| • |
5 year limited warranty. |
|
|
| ----------------------------------------------------------------------------------------------------------------------------------------- |
|
 |
| FEATURES |
| • |
Large, single crystal solar cells provide high light to energy conversion efficiency. |
| • |
Cells are textured and have an anti-reflection coating. |
| • |
Multiple redundant contacts provide a high degree of fault tolerance and circuit reliability. |
| • |
Cells within a module are electrically matched for increased efficiency. |
| • |
Circuit is laminated between layers of ethylene vinyl acetate (EVA) for moisture resistance, UV stability and electrical isolation. |
| • |
Low iron tempered glass front provides strength and superior light transmission. |
| • |
Rugged anodized aluminum frame is designed for exceptional strength. |
| • |
Side rails with mounting holes located for easy installation. |
|
 |
|
RATED POWER 20 WATTS
Intended for 12-volt systems only, the M20 regulates its electrical output to the needs of the battery. Self-regulation eliminates the need for separate charge control devices, resulting in a simple, reliable and economical power generating system.
Siemens solar electric modules are tested to meet or exceed industry standards, and even more rigorous Siemens quality and performance requirements. |
10 YEAR WARRANTY
The Siemens M20 solar electric module carries a 10-year limited warranty on power output. Utilizing the highest standard of construction, it is able to withstand some of the most severe environments in the world and continue to perform efficiently.
| • |
Tough, multi-layered polymer backsheet is used for environmental protectiojn, resistance to abrasion, tears and punctures.
|
| • |
A single junction box with cable is designed for easy field wiring |
|
SPECIFICATIONS
Rated Power 20.0 Watts
Current (typical at load) 1.38 Amps
Voltage (typical at load) 14.5 Volts
Short Circuit Current (typical) 1.60 Amps
Open Circuit Voltage (typical) 18.0 Volts
Power specifications are at standard test conditions of: 1000 W/M2 solar irradiance, 250C cell temperature and solar spectral irradiance per ASTM E892
Weight 5.6 lb (2.5 kg) |
|
|
| CHARACTERISTICS |
| The IV curve (current vs. voltage) shown demonstrates typical power response to various light levels at 250C and 470C cell temperature. |
| • |
Minimum power upon final factory inspection is within 10% of rated power |
| • |
Module leakage current of less than 50uA at 3000 VDC electrical voltage isolation |
| • |
Normal operating cell temperature (NOCT) as defined by ASTM E 1-36 is 420C ± -20C |
| • |
Laboratory tested for wide range of operating conditions (-400C to 900C, 0 to 85% humidity). |
| • |
Passes Salt Fog Test per Mil-Standard 810 |
| • |
Passes complete environmental requirements of JPL Specification NO. 5101-61 (Block V) |
| • |
External grounding screw for electrical safety. |
| • |
Ground continuity of less than 1 ohm for all metallic surfaces. |
| • |
Ten-year limited warranty on power output. |
|
|
| Pumps |
 |
TACO™ Pumps |
 |
MARCH™ Direct Current Pump (D/C) |
|
|
| TACO Pumps |
 |

008F |
APPLICATIONS
Designed for domestic hot water systems and circulation of open fresh water and potable water systems. The pump is suitable for use in draindown solar systems as well as heat recovery units.
|
APPLICATIONS
Designed for use in closed loop solar systems and Hydronic applications where higher head is necessary. |
FEATURES
| • |
UL llisted 1/40 HP motor is impedance protected, nonoverloading at any point on the pump curve. |
| • |
Bronze body with 3/8”, ½”, and ¾” sweat connections. Also ¾” NPT is available. |
| • |
Delivers flow to 6 GPM and head to 9 feet. |
| • |
Connections. |
| |
008 CARTRIDGE CIRCULATORS |
|
FEATURES
| • |
Cast iron flanged body available with ¾” through 1 ½” companion flanges. |
| • |
Flows to 14 GPM and head to 16 feet. |
| |
009 CARTRIDGE CIRCULATORS |
|
| 008B |
009F |
APPLICATIONS
The first circulators designed specifically for open Solar systems. This pump is suitable for use in domestic hot water recirculation lines in drainback solar systems as well as heat pumps.
|
Applications
Ideal for high efficiency, wall-hung compact boilers and closed solar drainback systems. |
| FEATURES |
| • |
Compact bronze body with connections. Available with ¼” – 1 ½” companion flanges or 5/8” and 7/8” sweat connections. |
| • |
Delivers flows to 9 GPM and head to 17 feet. |
|
|
| FEATURES |
| • |
27 foot shut-off head. |
| • |
Flows to 10 GPM. |
| • |
Companion flanges ¾” to 1 ½”. |
| • |
Low power consumption |
|
|
| |
Applications
Specially designed for open/drainback solar systems. |
| |
| FEATURES |
| • |
27 foot shut-off head. |
| • |
Flows to 10 GPM. |
| • |
Companion flanges ¾” to 1 ½” or 3/4" Sweat Connection. |
| • |
Low power consumption |
|
|
|
| MARCH™ Direct Current Pump (D/C) |
 |
| PERFORMANCE CURVES |
 |
|
| Valves, Sensors, Gauges, & Tanks |
 |
| ----------------------------------------------------------------------------------------------------------------------------------------- |
Mounting Hardware
The type and quality of the mounting hardware you use makes all the difference in the world for solar installations. The following hardware is chosen as the best, time-tested, solar mounting hardware available.
We offer the following hardware for sale (click for more info) |
» AE-MH Standard Mount
» AE-FM Flush Mount
» AE-RM Rack Mount
» MSC-MH Standard Mount |
 |
|